AGE APPROPRIATE WARNING

*ADULT SUPERVISION & PROPER SAFETY EQUIPMENT ARE REQUIRED WHEN UTILIZING THE TOOLS, PRODUCTS & TECHNIQUES DESCRIBED HERE ON OUR BLOG TO CREATE STAR WARS CUSTOMS.
Showing posts with label SKILL LEVEL: INTERMEDIATE. Show all posts
Showing posts with label SKILL LEVEL: INTERMEDIATE. Show all posts

Thursday, September 8, 2016

CLONE WARS "MAUL SUPER COMMANDO" created by Darth Daddy

This action figure was created for an action figure swap with a friend that you all may know as Star Wars customizer TheRealMarch4th.  We already had a version of the character in our own collection that was created by Peak-OB1 Custom Creations.

The figure was mainly a repaint of the Clone Wars Death Watch action figure with an addition of horns and spikes fabricated from some old rubber Jedi robes that could absorb impact if the figure was ever dropped to keep the embellishments intact.

We really liked the way the figure came out!


"MAUL SUPER COMMANDO"
created by Darth Daddy









SKILL LEVEL: INTERMEDIATE







Monday, July 4, 2016

Super-Articulated "Episode VII - Han Solo" created by Darth Daddy

On this day of celebrating independence, Customs for the Kid felt Han Solo best embodied the rebel spirit that we all wish we could emulate.  Assisting in taking out two Death Stars and the Starkiller Base in Force Awakens, I can think of no other so accomplished.  Paying tribute to the character meant constructing and executing a plan.


Super-Articulated 
"Episode VII - Han Solo" 
created by Darth Daddy



Transitioning the 5 POA action figure into a super-articulated one is easier than you would think, and all it takes to pull it off are parts from three Han Solo figures that can currently be found in stores.  First, I popped the head and jacket off of the "Force Awakens" Han Solo to set them aside to use in my project, and then placed the rest of the figure back in the fodder bin to use some other day. Next, I drilled the waist peg for The Black Series Endor Han Solo in the open space at the back of the figure to separate the lower from the upper torso. I then drilled what was left of the peg out of the inside of the upper torso to maintain a clear channel while being careful not to damage or change the upper torso in any way.  I then used a Dremel to hard-sculpt the front of the Endor shirt to texture the top to match the lower torso that I boiled free from the The Black Series - Han Solo "Starkiller Base" action figure which I planned to use the legs from.  I also borrowed the blaster and holster from this Han. While the peg on top of the lower torso was still warm, I connected the Starkiller Base legs to the bottom of the Endor Han torso. I then prepped the joints in the elbows and shoulders of the newly formed figure to eliminate paint rub. After that, I painted the arms on the figure to look like the sleeves of the removable jacket of the "Force Awakens" Han Solo by mixing some black and brown acrylic paint to match it as close as I could.  I also painted the two separate colors of the top and bottom shirts from my action figure to create a shared color that would no longer contrast each other. At the end all that was left to do was open the neck peg hole a little on the head before attaching it snugly to the top. When the figure was completely dry and sealed, I slipped the removable jacket from the 5POA figure onto my new creation.  The custom figure doesn't take very long to do at all and can be finished in just an hour or two.







RECIPE


The Black Series Endor Han Solo - Upper Torso and arms

The Black Series - Han Solo "Starkiller Base" - Hips, Legs, Holster and Blaster

"Force Awakens" Han Solo - Head and Removable Jacket



SKILL LEVEL: INTERMEDIATE








Monday, June 27, 2016

STAR WARS REBELS "CAPTAIN REX - STORMTROOPER DISGUISE" created by DARTH DADDY

After observing Captain Rex dressed in Stormtrooper disguise in the episode "Stealth Strike" in Season 2 of Star Wars Rebels, we knew we wanted to make the Stromtrooper version of Rex in action figure form. To accommodate Rex's bulky frame we used the body of the old POTF Stormtrooper with the head of the Star Wars Rebels Captain Rex action figure to create the silhouette we desired. To finish the figure off, we just hollowed out the head of a Star Wars Rebels Stormtrooper with a Dremel to make a removable helmet and placed the same figure's blaster into Rex's hand.  The figure only has 5 points of articulation at the time of this post, but if we later come across an abundance of double-sided ball joints down the road, we may decide to articulate him some more.



STAR WARS REBELS
"CAPTAIN REX - STORMTROOPER DISGUISE"
created by Darth Daddy
























SKILL LEVEL: INTERMEDIATE





Saturday, March 19, 2016

STAR WARS REBELS "CAPTAIN REX" created by Darth Daddy

One more Rebels post before we return to some Star Wars characters from the film series. Hasbro's Star Wars Rebels Captain Rex figure looked great, but we knew we wanted to embellish it a bit by increasing the articulation.  Dad took the ball jointed shoulders of a Yarna d'al' Gargan to articulate Rex's elbows and the knees from a Clone Trooper Pilot to get his legs to bend above the boots.  Dad hollowed out Rex's gauntlets and boots to accept the nubs Dad left attached to the ball joints that he glued to Rex's extremities.  Dad then used a styrene rod to create pins to attach to the hands articulating Rex's wrists.  Dad's efforts took an already amazing looking action figure, and made it that much better by increasing the pose-ability.

At some point, Dad said he is going to give him a proper paint application...


STAR WARS REBELS
"CAPTAIN REX"
created by Darth Daddy










"Captain Rex" by Darth Daddy. "Commander Wolffe" by Paul Martine











SKILL LEVEL: INTERMEDIATE





"STAR WARS REBELS" GREGOR 
by Elias



Saturday, February 6, 2016

Super-Articulated "Finn aka FN-2187 in First Order Stormtrooper Armor" created by Customs for the Kid

A few months ago, we made a 5POA version of Finn in his First Order Stormtrooper Armor.  It was a custom that took only a few seconds to create. This time around we put a little more effort into it. Instead of using the 5POA Stormtrooper body as the base figure like we did in our previous effort, this time around we utilized the Black Series super-articulated figure exclusive to Wal-mart to make our latest version of Finn. For this custom, we hollowed out the Stormtrooper helmet so it would fit over Finn's head, and painted the bloody handprint on.  To make the head from a Black Series Finn fit onto the Stormtrooper body, we just had to reduce the size of the neck peg to accommodate the head. We like this action figure a great deal more.

Since Finn barely participated in the battle of Jakku, and refrained from even firing off his blaster, we decided to not weather the armor on the figure.



Super-Articulated
"Finn aka FN-2187 in First Order Stormtrooper Armor"
by Customs for the Kid




















SKILL LEVEL: INTERMEDIATE


Sunday, September 20, 2015

Star Wars: Power of the Force - Millennium Falcon ("Episode VII: The Force Awakens" Conversion) by Elias

If you are like us, and you don't want to spend the money to buy another Millennium Falcon from Hasbro, here is a "Force Awakens" home improvement project that we made with our Star Wars: Power of the Force - Millennium Falcon.  Years ago we upgraded our Falcon when the Legacy edition hit stores, so the 1995 released toy was sitting out of view a retired toy.  Breathing life into it again was a real blast.  

We had to heat the metal pin free from the old dish to get it off the housing, but it pulled apart pretty easily after a few minutes of being boiled in water.  We weren't too crazy about the action features in Hasbro's new Millennium Falcon offering.  The Nerf feature just felt out of place, and paying for a new dish was much cheaper than the new Falcon's price tag.  We do admit that we wish we had the Finn and Chewbacca figures with the headsets!  Those are great looking figures.

3D Print Designer TonyRR offers a replacement dish for the Falcon on Shapeways. The 66 mm quad radar dish is not round but square like the Episode VII Falcon.  This upgrade is available in Frosted Ultra Detail.



"Star Wars: Power of the Force - Millennium Falcon 
(The Episode VII Conversion)" 
by Elias











SKILL LEVEL: INTERMEDIATE


ABOUT THIS PRODUCT



3D Print Designer TonyRR is offering a replacement dish for the Falcon you already have on Shapeways.

The 66 mm quad radar dish is not round but square like the Episode VII Falcon.

This upgrade is available in Frosted Ultra Detail.

*Not sure if this radar dish will work as well with the BMF Legacy/Vintage Boxed Falcon as it does with the POTF Falcon.  At least not without modifying the attachments considerably.  With the POTF Falcon, not even glue is needed and the old dish could be easily reattached without issue or damage to the original piece.