"JEDI YOUNGLINGS" the 2nd SET

I made the action figures below on commission for one of our readers. I was able to improve upon two of the headsculpts since our last attempt at the characters. Dad was able to cut down some of the labor time for me by molding and casting a few of the original heads that we made which was great because it saved me having to re-sculpt all six heads. Ganodi and Katooni were the onlt two characters that I still had to hand sculpt, because we just didn't have the right tools and set-up to mold and cast them. I really liked the sculpt more on the second attempts. It was hard to mail them out the door.

Even now mass production from the molds we have is sketchy without a pressure chamber. Between Byph's eyes and Zatt's tentacles, getting a good cast is next to impossible. Gungi was the only cast that needed only minor fixes. We kept the recipes for the figures exactly the same as we did for our first set of Younglings. Click on the photo of our first set below for the full breakdown of how they were made.

"JEDI YOUNGLINGS"

created by Elias

PURCHASE HEADS HERE

FIRST "JEDI YOUNGLINGS" SET

CUSTOMS FOR THE KID's CLONE WARS "JEDI YOUNGLINGS" featured on "CENTURIONS COMMUNITY CUSTOM CORNER"

This week we were featured on Episode 4 of Centurions Corners YouTube show "Centurions Community Custom Corner" where he featured our Jedi Youngling custom action figures that we made over the summer. The show is just awesome because it showcases some of the best Star Wars custom action figures that were made on a weekly basis. We recommend any Star Wars fan with a love of Star Wars custom action figures subscribe to his channel and watch future installments of his show. He even takes submissions, so if you made something cool, send him a message and maybe your custom will be featured in a future episode!

JEDI YOUNGLINGS

"JEDI YOUNGLINGS" created by Customs for the Kid (PART TWO)

Ever since we started this project it has been racing toward completion. It felt like every time we completed a new figure, we became so excited with what we had produced that we couldn't wait to get another action figure started and finished.  We were customizing maniacs every free moment we had. We were able to finish the entire project in less than 3 weeks which is unheard of for us. Usually it takes us months to create six, 100% sculpted figures. A real passion for the project and loads of teamwork were the key to the project's quick completion. We put in about seven, 10-12 hour workdays by the time we finished it up.

The workload was divided up fairly evenly. Dad sculpted out Byph by himself and did most of Zatt. I asked to sculpt Zatt's face and his two outer tentacles. I had something specific in mind and Dad said "go for it". I also added some subtle highlights to the figure before the paint was sealed. I sculpted Petro's head and upper torso, while Dad sculpted the arms and added articulation to the elbows and wrists. Dad also sculpted everything on Petro from the belt on down. We both shared the paint on Petro. The only thing Dad did on Katooni was shorten her arms, while showing me how to maintain the original articulation. The rest of Katooni was all me. I also did all the work there was to be done on Ganodi. With Gungi, Dad built out his body and then we split up the sculpting throughout. Gungi ended up being my first 100% sculpted head.

We were hoping to have had the parts here so Huyang could have been posed here with the rest of the bunch, but the shipping has been delayed and we don't have a clear arrival date. Therefore, Huyang will just get his own post on the blog at some future date. It is likely Huyang's big reveal will be on "Customizing The Clone Wars" when we discuss the Youngling arc, so stay tuned when the episode drops!

"JEDI YOUNGLINGS"

created by Customs for the Kid

Custom "Ahsoka Tano" created by Elias. Custom "Huyang" created by Darth Daddy

"BYPH" 

    Byph was a male Ithorian youngling who trained to become a Jedi during the Clone Wars.

RECIPE

Body, Arms and Legs - Modified "Lord Of The Rings" Gollum

Hands - Clone Wars Aura Sing

Head - Original Headsculpt by Darth Daddy

Ball jointed neck, shoulders and hips
Swivel wrists

"ZATT"

Zatt was a male Nautolan Jedi Youngling who was a member of the Jedi Order during the Clone Wars.

RECIPE

Head - Original Headsculpt by Customs for the Kid
Body, Arms and Legs - Modified "Lord Of The Rings" Gollum
Feet - Modified Vitruvian H.A.C.K.s Blank
Knees - Clone Wars Cad Bane

Ball jointed head, shoulders, knees, ankles and hips
Swivel wrists

"PETRO"

Petro was a human male Jedi Youngling who served the Jedi Order during the Clone Wars.

RECIPE

Head - Modified Clone Wars Boba Fett (Sculpt by Elias)

Body and Hands - Modified Vintage Padawan Anakin Skywalker

Upper Arms - Modified "Lord Of The Rings" Gollum

Lower Arms - Modified 3.75" Black Series "Force Awakens" Princess Leia

Ball jointed head, shoulders, elbows, ankles and knees
Swivel wrists and hips

"GANODI"

A Force-sensitive Rodian female, Ganodi was a Jedi initiate during the Clone Wars. Elias has since modified the headsculpt using Blender and our 3D resin printer. Tenacious resin was used for durability. The head was later molded, and casts were reproduced with Smooth On's 61D resin in a pressure pot.

RECIPE

Body, Arms, and Legs - Modified Vintage Padawan Anakin Skywalker

Left Hand - Modified "Lord Of The Rings" Gollum

Right Hand - Unknown

Head - Original Headsculpt by Elias

Ball jointed head, shoulders, elbows, knees, and ankles
Swivel hips and wrists

"KATOONI"

Katooni was a female Tholothian Jedi youngling who served the Jedi Order during the Clone Wars. Like all Tholothians, Katooni had a scaled head with half a dozen pale hanging tendrils. She was very patient, as shown when she waited to complete her lightsaber. She was trusting, believing in Hondo Ohnaka when he told her he would help rescue Ahsoka Tano. She appeared to have a fear of heights, as she was reluctant to climb the cliff in the Crystal Cave on Ilum. While very kind, Katooni was not afraid to call out Petro on numerous occasions.

Elias has since modified the headsculpt using Blender and our 3D resin printer. Tenacious resin was used for durability. The head was later molded, and casts were reproduced with Smooth On's 61D resin in a pressure pot.

RECIPE

Body, Arms, Hands, Legs, and Feet - Modified Clone Wars Ahsoka Tano

Head - Modified Rebels Ahsoka Tano (Headsculpt by Elias)

Ball jointed head, shoulders, knees and ankles
Swivel forearms and hips

"GUNGI"

Gungi was a male Wookiee Jedi youngling who was training to become a Jedi in the Jedi Order during the Clone Wars.

RECIPE

Body, Arms, and Legs - Modified Clone Wars Chewbacca
Ankles - Clone Wars Mace Windu

Head and Lightsaber- Original Headsculpt by Elias

Ball jointed head, shoulders, elbows, knees, and rocker ankles
Swivel hips and wrists

JEDI YOUNGLING 

CUSTOM LIGHTSABERS

All the lightsaber were custom made.

SKILL LEVEL: ADVANCED

PURCHASE HEADS HERE

CLICK LOGO TO PURCHASE

"JEDI YOUNGLINGS" created by Customs for the Kid (PART ONE)

Plenty in development over here at "Customs for the Kid". This Jedi Youngling project was just totally spontaneous and decided upon only minutes before we got to work on it. We had to make something special for an upcoming episode of "Customizing The Clone Wars". Darth Daddy's plan was to make the Hondo Ohnaka "Slave I" from the same story arc by repainting the large Vintage Collection Slave I.

I had other plans. Dad just went along with me once he saw my determination. We both wanted the younglings displayed in my collection and there was no better time than the present to get started at making them. Especially with the show that they'd be featured in only being two episodes away from release. Presently, we are just about halfway done with our "Youngling" project, which is surprising considering we only started 2 weeks ago. The remaining figures to be made will likely be revealed after we wrap up the "Customizing The Clone Wars" episode dedicated to their arc. In the episode, we will be teaching our viewers how to make a set of younglings for themselves. It will also be the first place the entire set of action figures will be shown together with the new additions of Ganodi, Gungi, and Huyang.

As far as the how the workload has been divided up so far, it has been a true team project. Dad sculpted out Byph by himself and did most of Zatt. I asked to sculpt Zatt's face and his two outer tentacles. I had something specific in mind and Dad said "go for it". I also added some subtle highlights to the figure before the paint was sealed. I also sculpted Petro's head and upper torso, while Dad sculpted the arms and added articulation to the elbows and wrists. Dad also sculpted everything on Petro from the belt on down. We shared the paint on Petro. The only thing Dad did on Katooni was shorten her arms, while maintaining the original articulation. The rest of her was all me. The recipes for all the figures will be on display in PART TWO of the "Jedi Youngling" post.

Dad made Zatt, Petro and Byph's lightsabers. I made Ganodi and Katooni's lightsabers. Gungi's  lightsaber has not been started yet.

As for what's ahead, Ganodi's sculpt has been totally completed since these photos were taken. I only have to paint her and she is ready to go on the dislay shelf.

GANODI

Gungi has been parted started, but finishing him before the show is a low priority. We know the host of our show, Peak-OB1 Custom Creations has a Gungi he has been working on, so making ours in time for "Customizing The Clone Wars" isn't necessary since we will have Chad's Gungi available for the episode. We still have half of Gungi's headsculpt to finish, mostly his beard as well as the hair on the sides and top of his head. We have to extend the hair above each ball joint to break up the straight lines and a few minor details need to be sculpted onto the belt that cuts diagonally across his chest before he is ready to be painted.

GUNGI

Here at home, we are most excited about an SLA resin 3-D print of Isotelus' Huyang that Dad just ordered and as of this posting is currently enroute to our home. Dad is hoping to modify and super-articulate the 3-D print to complete the entire set. Huyang is Dad's #1 Fan Choice figure to be made. He was hoping Huyang would have found a home at Galaxy's Edge making lightsabers with guests so he could be made into a 3.75" action figure one day, but we can only dream. Until then, better to take initiative and figure out a way to pull it off. Isotelus' design eliminated Dad's biggest obstacle, perfecting the symmetry that was would be required for a good headsculpt and torso for a droid. Isotelus also provided extra arms that could make adding articulation to the arms easier.

It was bit of a last minute decision to tackle so many figures at once, but we are so glad we made the leap!

PROFESSOR HUYANG